Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Fluid Replacement in the Mercedes E-Class

Model: Mercedes Classe E W213 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Brake fluid

See other generations:
Video tutorial

To replace the brake fluid in the Mercedes E-Class, start by positioning the vehicle on a lift or flat surface, securely immobilized. This step is essential for performing maintenance safely and stably.

Next, drain the brake fluid circuit and introduce a cleaning fluid before adding new oil. Begin by emptying the small oil reservoir (located in the engine compartment) using a common syringe or any suitable tool for this task. Then, fill the reservoir with the same amount of cleaning fluid.

Now, connect a pump to the bleed screw located on the circuit connection behind each tire, starting with the front driver's side wheel and continuing to the corresponding rear wheel, then to the other front wheel. This way, continue to expel the oil from the circuit.

You can also press the brake pedal to pump the cleaning fluid through the circuit until it is emptied. Finally, pour the new oil into the reservoir in the quantity specified by the manufacturer.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads on the Mercedes E-Class
Replacing the Rear Brake Pads on the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. replace the rear brake pads on the Mercedes E-Class. First, position the rear brake calipers in service mode by accessing the settings on the dashboard.. …
How to set the service mode of the rear brake pads on the Mercedes E-Class w213
How to set the service mode of the rear brake pads on the Mercedes E-Class w213
Mercedes Classe E (2016-2023 / W213) .. the rear brake service mode on the Mercedes E-Class W213 with electronic handbrake. Turn on the instrument panel, press the handbrake button to release.. …
Removing the Handbrake Lever from the Mercedes E-Class
Removing the Handbrake Lever from the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. remove the handbrake lever from the Mercedes E-Class by following these simple steps. First, get into the driver's seat and start by removing the plastic.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos