Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : Replacement of the windshield wiper blades of the Mercedes A-Class W177

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W177 - Years 2018-2024
Part: Windscreen wipers
Operation: Replacement of the windshield wiper blades of the Mercedes A-Class W177

In this video we see how to proceed to replace the windshield wipers of the Mercedes Class A: we lift one of the front brushes, push forward the end part of the arm and unhook the worn brush, gently place the arm on the windshield. We take the new brush, lift the arm and insert the brush, push back the end part of the arm and place it on the windshield. We repeat the same operations on the other brush. We move to the rear of the car, lift the rear wiper arm, press the two fins and remove the old brush, insert the new brush and lock the two fins.


Posted on 18 May 2024 by ScegliAuto



How do you replace the windshield wiper blades on a Mercedes A-Class?
Mercedes Classe A (2018-2024 / W177) The replacement of the windshield wiper blades on the Mercedes A-Class is done by lifting the blades themselves so that they are not in contact with
How do you replace the wiper blades on the Mercedes A-Class?
Mercedes Classe A (2018-2024 / W177) In order to replace the windshield wiper blades of the Mercedes A-Class you have to go and raise the blades, so that they do not directly touch the w
How do i replace the wiper blades on the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) To be able to replace the wiper blades on the Mercedes A-Class you have to lift the arm connected to the wiper motor, in order to detach the blades f

    Frequently Asked Questions

    • Classe A 2012-2018 - Why don't my Mercedes A-Class wipers work anymore? Read Answer
    • Classe A 2018-2024 - Where to top up the windshield wiper fluid on Mercedes A-Class? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos