|
Do it yourself
| |||
| ||||
How to Install Illuminated Door Sills on a Mercedes C-Class W204
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this video, see how to install illuminated door sills on a Mercedes C-Class W204: move the seats back and disconnect the negative terminal of the battery. Remove the trim from the driver side, then take out the floor mats and carpet. You will need to remove the accelerator pedal and the front cover of the left side floor. Perform all these steps on the passenger side as well (except for the pedal), but you will need to remove the sound insulation from the footrest by first taking out the lower nuts, then the upper ones. Gently place the footwell on the floor. The sills can be purchased, for example, on eBay with the code 225689146351 for $210.00, with free shipping. Open the cable channel; the components will be arranged in a "U" shape from one side of the vehicle to the other. The power cables and those for the sills will be connected to each other via a plug connector, while the control unit will be placed behind the center console, with the converters on the right and left of the footwells. Pass the cable bundles through the opening behind the center console. Repeat the operation on the other side. Now remove the cover on the left side of the dashboard to access the cabin fuses. Connect the cable bundle to connector 129 and put it back in place. Close the cover. Secure the cables in the channel and close it: proceed to the other side. Secure the cables at the ground point, plug in the connector located in the right channel, then connect the power connector for the door sills. Secure the cables and the control unit with double-sided tape, and plug in the connector, then replace the passenger footrest. Connect the converters in the channel. Now position the sills, but first, clean the bases. Replace the rubber gasket and the floor cover. You can reconnect the battery.
Updated on 3 October 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. contains all the fuses for your Mercedes-Benz C-Class W204. First, lift the hood of the car to gain access to the engine compartment. Then, locate the.. …
Mercedes Classe C
(2007-2013 /
W204)
.. how to install roof railing bars on a Mercedes C-Class W204. First, gather the bars to mount on top of your car and assemble them: insert the seals into.. …
Mercedes Classe C
(2007-2013 /
W204)
This guide shows you how to remove and replace the roof strips or moldings of the Mercedes C-Class, following the instructions below. First, get a th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |