Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Mercedes Sprinter?

Model: Mercedes Sprinter Br907, Br910, MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

The battery of the Mercedes Sprinter is located inside the cabin. To locate it, detach the carpet in the footwell on the driver's side.

Once the carpet is removed, loosen the screws securing the panel underneath, removing it to access the battery. The battery can be removed from its housing by loosening the screws that hold it in place and disconnecting the power cables.

This way, the old battery can be taken out and replaced with a new one. Finally, reassemble everything by securing the panel and covering it with the carpet.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to replace the diesel filter on the Mercedes Sprinter?
How to replace the diesel filter on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) To replace the diesel filter on the Mercedes Sprinter, open the bonnet to access the components inside the engine bay. Here, you will locate the air …
Replacing the Battery in a Mercedes Sprinter
Replacing the Battery in a Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video tutorial, learn how to remove and replace the battery in a Mercedes Sprinter by following the instructions below. First, locate the bat…
How to programme the auxiliary heating for the hot water in the Mercedes Sprinter
How to programme the auxiliary heating for the hot water in the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this guide, we will provide instructions to programme the auxiliary heating for the hot water in the Mercedes Sprinter. First, get in the vehicle …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos