Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Window Switch on the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, see how to change the window switch on the Mercedes Sprinter from the driver's side. This component commonly fails on this vehicle.

You need to remove the door trim to carry out the work, so first, open the two clips at the bottom of the door, then use a small screwdriver or a plastic spatula to remove the caps at the top; unscrew all the screws inside; remove the top part of the handle, where you will find two more screws.

This way, you can take off the entire panel, disconnecting the electrical connector of the switch you need to replace and pulling out the clips that still hold it. You can find the switch on Amazon with code B087NMM71J for £18.00, with free delivery for Prime customers.

Replace the switch by clicking it into its white plastic hook and seating it in its housing. Reconnect the electrical connector.

Now, follow the reverse procedure to refit the panel.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

Mercedes Sprinter (2006-2018 / MK 2, W906) In order to replace the battery of the Mercedes Sprinter remote control, you need to press the button on the top of the device to allow it to lever o…
Mercedes Sprinter (2006-2018 / MK 2, W906) To replace the battery of the Mercedes Sprinter remote, first remove the key from the bottom of the device. Once the key is extracted, lever it out o…
Mercedes Sprinter (1995-2006 / MK 1, W901) Today's guide will show you how to disassemble and replace the battery of the remote key for the Mercedes Sprinter in simple steps. First, take your …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos