Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cooling Radiator and Fan on the Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Radiator

See other generations:
Video tutorial

The main steps today will show you how to disassemble and replace the cooling radiator and its fan on the Mercedes E-Class. First, get inside the vehicle and start by removing the intake hose located at the top. Next, remove the radiator fan by unscrewing the mounting screws at the top and disconnecting the electrical connector, as shown in the video.

At this point, disconnect the radiator hoses, allowing the coolant to drain into a container, and also remove the radiator, finally reassembling everything!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Remove the Radiator Fan from a Mercedes E-Class
How to Remove the Radiator Fan from a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. you can start, open the hood of your Mercedes E-Class. First, unscrew and remove the bolts securing the radiator fan to the radiator. Then, disconnect.. …
How to Replace the Cooling Fan on a Mercedes E-Class?
How to Replace the Cooling Fan on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the cooling fan on a Mercedes E-Class, open the hood to access the cover panel at the front of the engine compartment. Remove this panel.. …
How to Remove the Radiator from a Mercedes E-Class
How to Remove the Radiator from a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replacing the cooling radiator on a Mercedes E-Class. Open the hood, and using a suitable socket wrench, remove the plates that secure the radiator.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos