Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlight Bulbs on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

First, release the hood using the designated lever and lift it up. Turn the wheels to gain easier access to the inner fender. This way, you can remove the cover that gives you access to the back of the headlight.

To remove it, simply unscrew the screw at the top of the cover and take it out. Now, remove the protective cap on the back of the headlight, and you can also remove the affected bulb. Install the new bulb and retrace your steps.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (1997-2004 / W168) .. burnt-out front headlight bulbs on a Mercedes A-Class? Here's how to remove and replace them. Open the hood by pulling the lever located at the bottom.. …
Mercedes Classe A (2012-2018 / W176) .. rear headlight and its bulbs on the Mercedes A-Class. First, open the trunk lid and start removing the plastic side cover; then, unscrew the plastic.. …
Mercedes Classe A (2012-2018 / W176) .. how to remove the rear headlight of a Mercedes A-Class. Open the trunk and secure it; locate the access to the rear headlight (next to the trunk lining);.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Replace the Headlight Bulb on a Mercedes A-Class W169?

If one or more bulbs in the front headlights of your Mercedes A-Class W169 (2004-2012) are not functioning correctly, you need to replace them. This is a very simple task that takes just a few minutes. First, park the car safely and turn it off completely. Next, go to the front and lift the hood. Remove the protective cover located inside the engine compartment and take out the faulty bulb. Finally, insert the new replacement bulb and properly reattach the protective cover. Close the hood, and you're done.

Watch the video!


by ScegliAuto

More videos