Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in Your Mercedes GLA

Model: Mercedes Gla W156, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin air filter in your Mercedes GLA, carefully read the following guide and follow the described procedure. First, purchase a new air filter that is fully compatible with your vehicle.

Then, enter the cabin and locate the front passenger seat. Bend down and reach the lower area of the glove compartment to find the air filter housing.

Finally, open it and proceed to replace the filter.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on the 2017 Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) If you own a 2017 Mercedes GLA and want to find the OBD port to connect any compatible diagnostic tool, simply read the following guide carefully and…
Where is the OBD2 port located in the Mercedes GLA?
Where is the OBD2 port located in the Mercedes GLA?
Mercedes Gla (2020-2026 / MK 2, H247) Locating the OBD2 port in your new Mercedes GLA is really simple and to do so you just need to follow these steps. First of all, open the driver's si…
How do you replace the timing belt of the Mercedes GLA?
How do you replace the timing belt of the Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) In order to replace the timing belt of the Mercedes GLA, it is necessary to lift the car so that the right front wheel is not in contact with the gro…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos