Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Mercedes CLA

Model: Mercedes CLA C118, X118 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Air filter

See other generations:
Video tutorial

If the engine in your Mercedes CLA frequently overheats even at low RPMs, it is likely time to replace the air filter located in the engine compartment. First, lift the hood, then remove the entire central protective cover, and locate the box that contains the air filter.

Once you have done this, remove the air filter and replace it with a new one. Finally, close the box by correctly installing the designated cover and reposition the protective cover you removed earlier.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Replace the Cabin Filter on a Mercedes CLA
Replace the Cabin Filter on a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) To replace the cabin filter on a Mercedes CLA, the first thing to do is purchase a new pollen filter. Next, get inside the vehicle, turn off the engi…
Replacement of the thermostat of the Mercedes CLA 250
Replacement of the thermostat of the Mercedes CLA 250
Mercedes CLA (2013-2019 / C117, X117) In this guide we will see the main instructions that will allow us to disassemble and replace the thermostat of the Mercedes CLA 250 with a 2.0 petro…
How to Replace the Auxiliary Battery in the Mercedes CLA
How to Replace the Auxiliary Battery in the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Learn through this video tutorial how to replace the auxiliary battery in a Mercedes CLA. First, you need to know where it is located. The auxiliary …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos