|
Do it yourself
| |||
| ||||
How to install the front headlight assembly of the MG ZS
In this video we see how to install the front optical group on a MG ZS: it is an operation that requires a certain manual skill. Regarding the spare part, it is important to know if the headlight we intend to change has 10 or 11 pins. In fact, the price changes. We can find it on Amazon with the code B0DN625KCG: 10 pin 336.60 euros; 11 pin 427.22 euros. Free delivery in both cases. The procedure shown in the video shows us the partial removal of the bumper, only on the side where the headlight to be replaced is located. This is necessary because one of the fixing screws of the headlight is hidden behind the bumper. The headlight is fixed by three main screws: the two upper ones are visible and accessible by opening the engine hood, while the third is positioned at the bottom and is the one that requires the partial detachment of the bumper. Once all the screws are removed, the headlight is free, so we pull it outwards, disconnect the electrical connector, and proceed to connect it to the new optical group instead: we do a functionality test and insert and screw the lower screw, then the upper ones and correctly reposition the parts of the bumper that we had detached.
Posted on 23 August 2025 by ScegliAuto
Video tutorial
Related tutorials
MG ZS
(2017-2024 /
Zs11)
Let's see in this guide the main instructions that will allow us how to install the rear camera for parking maneuvers on the MG ZS. First of all, let…
MG ZS
(2017-2024 /
Zs11)
In order to replace the bulb in the MG ZS headlight, you need to open the bonnet, so that you can access the inside of the headlight corresponding to…
MG ZS
(2017-2024 /
Zs11)
It is possible to install a new armrest on the Mg Zs without resorting to a professional. The tool we need is only one: a Phillips screwdriver or an …
Other guides you may be interested in
|
How to Replace the Fuel Filter on Opel Astra
How do you replace the fuel filter on Opel Astra? Let's see the replacement: lift the car with a column lift (jack) and secure it. Remove the locking plate of the filter using a socket spanner (undo the securing bolts next to the plate) where it is located and disconnect the wires and various hoses from the filter. Extract the diesel filter and replace it with a new one. Finally, reassemble the diesel filter housing (connect the hoses and wires) and tighten the bolts to the metal plate (as shown in the video). Lower the car after the replacement. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.108
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |