Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : How to replace the MG 3 key battery

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Key
Operation: How to replace the MG 3 key battery

In order to correctly replace the key battery of your MG 3 Mk2 it only takes a few seconds. Just follow the instructions in the following mini guide. The first thing to do is to remove the physical key inserted inside the cover so as to have access to the side slot. Then remove the metal part of the cover and the protective cap of the battery located immediately below. At this point all that remains is to replace the old battery with a perfectly compatible new one. Finally, replace the previously removed cover and reposition the emergency key correctly.


Posted on 8 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos