Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to change engine oil on Mg Zs

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Engine oil
Operation: How to change engine oil on Mg Zs

Let's see in this guide the instructions that will allow us to replace the engine oil and the oil filter, carrying out the ordinary maintenance coupon, of the Mg Zs. First of all, we open the bonnet of our car and start unscrewing the engine oil filler cap; lift the car and then unscrew the bleed screw, letting the oil drain into a container for about ten minutes. At this point we use the special key to unscrew the oil filter, replacing the cartridge with the new one; finally pour the new oil, checking the level using the dipstick!


Posted on 17 November 2022 by ScegliAuto



How to change the engine oil on the Mg Hs
MG ZS (2017-2024 / Zs11) Do we want to proceed with replacing the engine oil and oil filter on our car? In the description below, we find all the useful steps and necessary i
How to change the timetable of the MG ZS
MG ZS (2017-2024 / Zs11) Today we will see, in this short and simple guide, how to change the time of the MG ZS, following the instructions below. First of all, we get on boa
How to change gears on the Mg Zr.
MG ZS (2017-2024 / Zs11) Do we want to proceed with replacing the air filter on this car model independently? In the description below, we can find all the information and us

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos