Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Gloster
    4. : How to adjust tailgate opening on Mg Gloster

MG Gloster - Video tutorial

Model: MG Gloster MK 1 - Years 2017-2024
Part: Bodywork
Operation: How to adjust tailgate opening on Mg Gloster

This car is equipped with an electronic adjustment system for the opening of the tailgate and its width. Opening is controlled by the remote control key and when we open the tailgate with the key, the tailgate itself will lift up to an intermediate position, after which, if we need to open it completely, we can press the button located immediately above the hook. closing on the tailgate. With the same command we can also close the tailgate by first holding it down for 3 seconds and then releasing the button and pressing it again for a moment.


Posted on 16 December 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos