Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. MG
  4. :
  5. ZS
  6. : How do you replace the thermostat on the MG ZS?

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Thermostat
Operation: How do you replace the thermostat on the MG ZS?

In order to replace the thermostat of the MG ZS you have to go and open the bonnet so that you have access to the components inside the engine compartment: in order to access the piece it will be necessary to completely disassemble the intake manifold. This can be removed after all screws have been loosened and the connectors disconnected; in this way, having access to the underlying components, it will be possible to remove the thermostat from inside its housing, replacing it with a new one. After the installation of the new thermostat, all the parts that have been previously disassembled can be repositioned.


Posted on 24 April 2023 by ScegliAuto



How to replace the headlight bulb on the Mg Zs
MG ZS (2017-2024 / Zs11) In this video tutorial we will see the main instructions on how to remove and replace the headlight bulb of the Mg Zs. First of all, we open the bonn
How to replace the MG ZS air filter
MG ZS (2017-2024 / Zs11) If the air filter inside the engine compartment of your MG ZS shows serious signs of wear, then it is time to replace it and fit a new one so as to p
How to replace the MG ZS key battery
MG ZS (2017-2024 / Zs11) Fortunately, replacing the battery in the key of your MG ZS is one of the simplest operations to carry out independently and in a few seconds. Below

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos