Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery of the MG EHS key remote.

Model: MG EHS MK 1 - Years 2023-2026
Part: Key

Today we will see the instructions that will allow us to disassemble and replace the battery of the MG EHS key remote control, in simple and quick steps. First, we take our remote control and start by removing the physical key from inside it; we lever on the sides to open the remote control in two parts, as shown in the video. At this point, we remove and replace the battery with the new one, of the correct type and having the same code; insert it in the correct direction and reassemble the remote control, finally verifying the operation of all commands!

Posted on 1 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to open the trunk of the MG EHS
How to open the trunk of the MG EHS
MG EHS (2023-2026 / MK 1) Today we will see how to open the trunk of the MG EHS. Like all vehicles, the trunk can be opened from inside the car when the central locking is unl…
How to Change the Language on the MG EHS
How to Change the Language on the MG EHS
MG EHS (2023-2026 / MK 1) In this video, we will see how to change the language on the multimedia screen of the MG EHS: Turn on the car without starting the engine, in ON mode…
The use of the 360° camera on the MG EHS.
The use of the 360° camera on the MG EHS.
MG EHS (2023-2026 / MK 1) The MG EHS is equipped with 360° camera technology, which combines footage from four cameras (front, rear, and two under the side mirrors) to create …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos