|
Do it yourself
| |||
| ||||
How to reset the tire pressure sensor on the Mini Countryman
Model: Mini Mini
F60, Countryman2
- Years 2017-2023
Following this brief procedure, we will see how to reset the tire pressure warning light on the Mini Countryman; before performing the reset, it is necessary that all four tires are at the correct pressure. Then, we get into the car and start the instrument panel; from the central display, we will go to the settings of the onboard computer until we reach the tire pressure option, starting the TPMS sensor reset procedure and the consequent resetting of the warning light, as shown in the video. Now we just have to wait for the instrument panel to reset the warning light!
Posted on 2 September 2024 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2010-2016 /
R60, Countryman1)
In order to reset the tire pressure warning light on the Mini Countryman, you need to inflate all the tires that are at an insufficient inflation pre…
Mini
(2010-2016 /
R60, Countryman1)
The activation of the TPMS light indicates a possible puncture or pressure loss from one or more tires; in this guide we will see how to reset the ti…
Mini
(2010-2016 /
R60, Countryman1)
If the orange tire pressure warning light on the instrument panel of your 2015 Mini Countryman continues to stay on, it means that the control unit h…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
