Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Mini Mini R53, R52, R50 - Years 2001-2007
Part: Engine oil

Video tutorial
Detailed instructions - Using a ratchet spanner, gently unscrew the oil filter and remove it from its seat. Obtain the correct quantity of oil suitable for the type of engine. Lift the car with the appropriate jacks and secure it with suitable supports to prevent it from falling, allowing you to work safely. Place a plastic sheet and an oil collection tray under the engine. Unscrew the oil cap on the sump and let it drain. Clean the inside of the filter thoroughly, then replace the used oil filter cartridge with a new one, also replacing the O-ring gasket. Close the oil cap, refit the oil filter, and top up with new oil. After a test drive, check the oil level again. Do not dispose of used oil in the environment but take it to the appropriate collection centres.

Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil Filter on a Mini
How to Replace the Engine Oil Filter on a Mini
Mini (1959-2000 / ) How to replace the engine oil filter on a Mini? Follow this guide to proceed with the replacement: open and lift the front bonnet, securing it. Using…
How to replace the engine oil and oil filter on a Mini One
How to replace the engine oil and oil filter on a Mini One
Mini (2014-2023 / F56, F57, F54, F55) The replacement of the motor oil is necessary when, after the months since the last service, the red oil light comes on. Along with the oil, it is al…
How to Replace Oil and Filter on a Mini
How to Replace Oil and Filter on a Mini
Mini (2007-2014 / R56, R55, R57) How to replace the engine oil and filter on a Mini? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compa…

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2001-2007 - How much engine oil does it take for the 1.6cc Mini Cooper petrol engine? Read answer

How to reset the tyre pressure warning light on the Peugeot 508?

To reset the tyre pressure warning light on the Peugeot 508, inflate the tyres until they reach the corresponding pressure value: this value is stated on the sticker attached to the driver’s door pillar. Once the tyres are inflated, proceed to the interior of the vehicle and turn on the instrument panel; if the warning light remains on, start the engine and drive for a few miles until the light turns off.

Watch the video!


by ScegliAuto

More videos