Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Underbody Protection Bar Kit

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Accessory kit

To better protect the mechanics under the body from potential damage caused by bumps or other obstacles on unpaved roads, it is advisable to install additional protection. The operation is very simple and does not require special tools. Lift the car on the ramp to facilitate the installation process. Remove the four retaining bolts of the current protection and then insert and tighten the two studs provided in the kit using an Allen key to secure the protection bar. Fasten the bar with the remaining bolts and tighten them securely with a ratchet spanner.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Bicycle Carrier Installation
Rear Bicycle Carrier Installation
Mini (2010-2016 / R60, Countryman1) The vehicle is already prepared to accommodate the bicycle carrier accessory, which is very simple and quick to install. Obtain the original bicycle …
Replacing the Standard Car Radio
Replacing the Standard Car Radio
Mini (2007-2014 / R55, R57, R56) This video briefly explains the process of replacing the standard car radio in a Mini Cooper R 56 with a new unit. The new radio appears already inst…
Installing an Anti-Roll Bar
Installing an Anti-Roll Bar
Mini (2001-2007 / R53, R50, R52) Installing the anti-roll bar is very simple: it should be applied to the supports of the front shock absorbers. Once you open the front bonnet, remov…

Other guides you may be interested in

How to Replace the Battery on a Volkswagen Polo

When your vehicle won't start and makes noises similar to electrical contacts, the cause is likely the battery. Release the bonnet using the appropriate lever and lift it to secure it with the prop rod. First, check the condition of your battery, then disconnect the terminals, starting with the negative one. Next, unclip the brackets securing the battery on both sides, then unscrew the bolts on the sides of the battery base to remove the brackets holding it in place. Install the new battery, and you're done!

Watch the video!


by ScegliAuto

More videos