Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the light bulb of a Mini

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Interior dome light bulb

Remove the burnt out light bulb from the ceiling light? We remove the bulb from inside the spotlight. We are going to pry between the cover of the ceiling light (transparent glass) and the covering frame of the ceiling light. We take the disassembled slide out of the ceiling light, then remove the light bulbs / LEDs. We mount the new bulb inside the plastic of the ceiling light. We fix the slide in the ceiling light (we push the same with our hands until the plastics are completely blocked). We test the correct functioning of the light before reassembling the piece. We use bulbs or LEDs of voltage recommended in the use and maintenance booklet.

Posted on 24 October 2020 by ScegliAuto

Video tutorial

Related tutorials

Mini arrow bulb replacement
Mini arrow bulb replacement
Mini (2010-2016 / Countryman1, R60) Let's see how to remove the side indicator light of a Mini. We lift the headlight to access the side light. We disassemble the cover on the side of t…
How to Remove the Interior Light of a Mini
How to Remove the Interior Light of a Mini
Mini (2001-2007 / R52, R50, R53) Remove the interior light of a Mini: use a screwdriver or plastic lever to pry between the cover and the light itself (avoid damaging the headlining)…
How to replace the rear fog light bulb on your Mini Cooper
How to replace the rear fog light bulb on your Mini Cooper
Mini (2001-2007 / R52, R50, R53) Let's briefly see the instructions necessary to disassemble and replace the rear fog light bulb of the Mini Cooper. First of all, let's move to the r…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos