Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Disassembly of alternator on Mini

Mini - Video tutorial

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Alternator
Operation: Disassembly of alternator on Mini

How to remove the alternator on a Mini? Let's see how it disassembles. We open and lift the front hood, unscrew the locking pins of the right headlight, remove the engine soundproofing panel. We begin to disassemble the alternator clamping pins. Once the piece has been disassembled from its seat, let's disconnect the belt from it. We mount a new alternator inside the engine compartment: we connect the belt and the electrical terminals after having secured the same with the screws. We connect the battery and test the operation of the alternator (we use a tester to verify the charging).


Posted on 25 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Mini 2010-2016 - What does the battery light in Mini Countryman mean? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos