Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Replacement mirror cap on Mini Cooper

Mini - Video tutorial

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Outside rearview mirror
Operation: Replacement mirror cap on Mini Cooper

Remove the plastic at the base of the exterior mirror and unscrew the two screws that secure it to the bodywork, then disconnect the connector by pressing it on both sides. Already done! As you can see, this is a very simple operation. To assemble the new mirror, obviously proceed backwards, connecting the connector and placing the cap in place before screwing it on. If, on the other hand, you only need to replace the mirror, just pry it from behind with a plastic wedge. In the video, before the mirror, you are also shown how to remove the handle and the door panel.


Posted on 24 January 2024 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos