Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing chain on the Mini Cooper S?

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Timing belt

In order to replace the Mini Cooper S timing chain, you need to open the hood to access the engine compartment and remove the plastic cover from the top of the engine. Once the cover has been removed, the bolts that secure the engine head can be loosened and therefore also those that secure the side cover. In this way, it will be possible to have access to the sprockets, in particular it will be necessary to loosen the central pin of the chain tensioner. By doing so, it will be possible to reduce the tension of the chain and replace it with a new one, installing all the components previously removed.

Posted on 28 November 2021 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing chain of the Mini Cooper.
Guide to replacing the timing chain of the Mini Cooper.
Mini (2001-2007 / R52, R50, R53) The main information today will show us how and when to replace the Mini Cooper's timing chain, following the instructions below. On this type of eng…
Replacement of the Mini Cooper's distribution chain.
Replacement of the Mini Cooper's distribution chain.
Mini (2007-2014 / R56, R57, R55) Today's guide will show us the main steps on how to disassemble and replace the timing chain of the Mini Cooper, in this case with the engine removed…
Guide to replacing the timing chain of the Mini Cooper S
Guide to replacing the timing chain of the Mini Cooper S
Mini (2001-2007 / R52, R50, R53) Today's guide will show us the main steps for disassembling and replacing the timing chain of the Mini Cooper S. On this type of engine, the timing c…

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos