Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Mini Countryman?

Model: Mini Mini F57, F56, F55, F54 - Years 2014-2023
Part: Warning light – error code

The reset operation shown in this video refers to the engine oil change warning message. First of all, press the red start-stop lever, positioned in the center of the dashboard, to turn on the ignition and on which the service message will appear. Proceed as follows: Press and hold down the button at the bottom and to the right of the odometer, until we read "Reset Possible" next to the oil warning light. Then press the same button again for a few seconds and we will read the question "Reset?". We will always confirm the yes with the above key, pressed once again for a few seconds and we will wait for the message "Reset Done" to appear. Procedure finished.

Posted on 20 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Mini Countryman?
How to reset the "Service" light on a Mini Countryman?
Mini (2017-2023 / Countryman2, F60) To reset the "Service" light on a Mini Countryman, start by turning on the instrument panel without starting the engine. Press the button located bel…
How to reset the oil service in the Mini Countryman?
How to reset the oil service in the Mini Countryman?
Mini (2017-2023 / Countryman2, F60) Resetting the oil service in the Mini Countryman, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, make…
How to reset the tire pressure warning light on the Mini Countryman
How to reset the tire pressure warning light on the Mini Countryman
Mini (2010-2016 / Countryman1, R60) The activation of the TPMS light indicates a possible puncture or pressure loss from one or more tires; in this guide we will see how to reset the ti…

Other guides you may be interested in

How to Replace the Front Headlight of a Toyota Aygo

To carry out this operation, you will need to release the bonnet from the appropriate lever to lift it and secure it with the prop rod. Disconnect the battery terminals to protect any more delicate circuits, then proceed to unscrew all the bolts securing the bumper and the headlights themselves, as there are additional bolts behind the bumper to remove. Disconnect the connectors at the back of each headlight to extract it, and in this way, you can install the new headlight. Reverse the steps described for reassembling the various components.

Watch the video!


by ScegliAuto

More videos