Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wiper blades of the Mini Mino r50

Model: Mini Mini R52, R50, R53 - Years 2001-2007

By carefully following the operations indicated in the video, you cannot go wrong in installing the wiper blades on your Mini Mino r50. First, make sure that all the parts needed for assembly are included in the accessory kit you have just purchased. Once this is done, position the applique on which the brush will then be mounted exactly in the position indicated in the video. Lay it on top and push it in the direction shown in the video until you feel it is locked. Now insert the brush inside the applique as seen in the video and push it all the way down.

Posted on 23 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the windshield wiper blades of the Mini 2
How to replace the windshield wiper blades of the Mini 2
Mini (2001-2007 / R52, R50, R53) Today we will explain how to replace the front and rear windshield wiper blades of a Mini 2. To perform this operation, we need to lift the front win…
Replacement of the windshield wiper motor of the Mini Cooper
Replacement of the windshield wiper motor of the Mini Cooper
Mini (2001-2007 / R52, R50, R53) In this video tutorial, we will see how to disassemble and replace the front windshield wiper motor of the Mini Cooper, following these simple steps.…
How do you replace the windshield wipers on the Mini Countryman?
How do you replace the windshield wipers on the Mini Countryman?
Mini (2017-2023 / Countryman2, F60) In order to replace the windshield wiper blades of the Mini Countryman, you need to lift the old blades so that they are no longer in contact with th…

    Frequently Asked Questions

    • Mini 2010-2016 - Where is the inflation kit located on the Mini Countryman? Read answer

How to Replace the Engine Air Filter on a Volkswagen Polo

Remove the engine air filter from a Volkswagen Polo: open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it with the prop rod. Remove the engine soundproofing panel (if necessary), then open the air box (unscrew the securing screws), remove the cover of the filter box and take out the engine air filter. Insert a new filter into the dedicated housing (ensuring it fits snugly around the edges). Finally, refit the air box cover and tighten the screws. Close the front bonnet after maintenance.

Watch the video!


by ScegliAuto

More videos