Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
F60, Countryman2
- Years 2017-2023 In this video, we see how the start & stop system works on the Mini. The button for this functionality is located next to the ignition and is initially set to start & stop mode. In fact, if you press the button, an LED lights up to indicate that the function is deactivated. When the functionality is activated, the engine automatically turns off at a traffic light, a level crossing, or an intersection. Pressing the clutch (in the case of a manual transmission) automatically turns the engine back on. The advantage is a reduction in fuel consumption and lower pollution. You must absolutely know that this function does not drain the battery and therefore does not affect its lifespan.
Posted on 9 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the error of the VSC warning light and the ABS of the Toyota Rav4Let's see in this guide how to reset the error of the VSC warning light or the ABS of the Toyota Rav4, analyzing the possible causes. In fact, usually the VSC warning light appears almost always simultaneously with that of the ABS; it indicates a fault in the braking system, in particular in the brake pedal switch located behind the pedal, as shown in the video. Then we get on board the car, on the driver's side, and start by unhooking and removing our switch, disconnecting the electrical connector; then let's reassemble everything, checking that the errors have been cleared from the instrument panel! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |