Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mitsubishi Xpander

Model: Mitsubishi Xpander Nc1w, Nc2w, Ne3w, MK 1 - Years 2017-2026
Part: Service warning light

To reset the service light on a Mitsubishi Xpander, insert the key into the ignition without starting the engine and use the onboard computer button to display the maintenance interval screen. Once you reach the service section, press and hold the selection button for a few seconds until the reset request appears. Confirming the operation will restore the maintenance reminder and store the new service interval. At the end of the procedure, simply turn off and turn on the ignition to verify that the service light or related message is no longer present on the display.

Posted on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Mitsubishi Xpander
How to Reset the Maintenance Light on a Mitsubishi Xpander
Mitsubishi Xpander (2017-2026 / Nc1w, Nc2w, Ne3w, MK 1) This guide shows how to reset the maintenance light on a Mitsubishi Xpander. First, with the ignition off, press the "INFO" button to cycle through t…
How do you reset the Service light of the Mitsubishi Xpander?
How do you reset the Service light of the Mitsubishi Xpander?
Mitsubishi Xpander (2017-2026 / Nc1w, Nc2w, Ne3w, MK 1) It will be possible to completely reset the Service light of the Mitsubishi Xpander by holding down the button located in the bottom right of the cen…
How to Reset the Service Light on a Mitsubishi Xpander
How to Reset the Service Light on a Mitsubishi Xpander
Mitsubishi Xpander (2017-2026 / Nc1w, Nc2w, Ne3w, MK 1) .. Today, we will show you how to reset the service light on a Mitsubishi Xpander by yourself. The reset procedure is quite simple... …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos