Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Conditioning Fan from a Mitsubishi Montero

Model: Mitsubishi Mitsubishi Various
Part: Blower motor

Video tutorial

In today's video, you will see the main steps and instructions to remove the air conditioning fan from a Mitsubishi Montero. Start by removing the plastic panel inside the car, in the passenger compartment, by unscrewing the screws with a screwdriver.

Then, remove the two screws from the condenser and take it out. Disconnect the electrical connector from the motor and remove the screws using a flathead screwdriver; then extract the motor. The reassembly part will be illustrated later, so be sure to watch the video until the end!


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Mitsubishi Montero Sport
How to Set the Time on the Mitsubishi Montero Sport
Mitsubishi Mitsubishi Various If the central display of your Mitsubishi Montero Sport shows the wrong time and you want to learn how to change it manually, simply read the followi…
How to Reset the TPMS Light on the Mitsubishi Montero
How to Reset the TPMS Light on the Mitsubishi Montero
Mitsubishi Mitsubishi Various To manually reset the service light on your Mitsubishi Montero MK2, follow the specific procedure outlined in this mini guide. Enter the vehicle, clo…
Where are the Fuses of the Mitsubishi Montero Located?
Where are the Fuses of the Mitsubishi Montero Located?
Mitsubishi Mitsubishi Various The fuses of the Mitsubishi Montero are all contained within the dedicated fuse box installed in the vehicle: this is located inside the dashboard, b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos