Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on a Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Glow plugs

See other generations:
This video is currently unavailable

Before you start, open the bonnet of your Mitsubishi Pajero. Begin by slightly loosening the securing bolts of the positive terminal linking bar using an eight-millimetre socket.

At this point, remove everything connected to the glow plugs. This will give you access to the glow plugs, which you can then remove.

To do this, use a twelve-millimetre socket, and the disassembly will be complete. To install the new glow plugs and reassemble everything, simply reverse these instructions, and the replacement will be finished.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Mitsubishi Pajero
How to Replace the Spark Plugs on a Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / V80, MK 4) To replace the spark plugs on a Mitsubishi Pajero, open the bonnet to access the components inside the engine bay: you will need to unscrew the bolts…
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
How to replace the fuel filter of the Mitsubishi Pajero 3.0 V6
How to replace the fuel filter of the Mitsubishi Pajero 3.0 V6
Mitsubishi Pajero (1999-2006 / V60, MK 3) The following steps will show us the process of disassembling and replacing the fuel filter of the Mitsubishi Pajero 3.0 V6. First, lift the vehicle …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos