Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on a Mitsubishi Pajero

Model: Mitsubishi Pajero MK 4, V80 - Years 2006-2021
Part: Spark plugs

To replace the spark plugs on a Mitsubishi Pajero, open the bonnet to access the components inside the engine bay: you will need to unscrew the bolts securing the top of the engine block, completely removing it to access the underlying components. Disconnect the connectors attached to the injectors by pulling them from their sockets to reach the spark plugs below. These should now be unscrewed, removing them from their housing and replacing them with new spare parts; after replacement, reassemble all previously removed parts.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mitsubishi Pajero (1999-2006 / MK 3, V60) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
Mitsubishi Pajero (1999-2006 / MK 3, V60) The following steps will show us the process of disassembling and replacing the fuel filter of the Mitsubishi Pajero 3.0 V6. First, lift the vehicle …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos