Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Colt
    4. : How to reset the service on the Mitsubishi Colt 1.1 petrol

Mitsubishi Colt - Video tutorial

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Operation: How to reset the service on the Mitsubishi Colt 1.1 petrol

If we see the wrench warning light in the dial of our Mitsubishi Colt, it is time to have the service done. Next we will have to reset the counter on the dial. In this short video we will see the steps required to perform the reset. With the dial off and the ignition key in position 0 of the switch, press the "Trip" button on the instrument panel until we reach the message indicating the distance remaining until the next service. Now keep the "Trip" button pressed until the wrench symbol starts flashing, let go of the button and press it again, the clear message will appear and then we will see the km that can be traveled until the next coupon.


Posted on 18 January 2024 by ScegliAuto

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos