Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Front Headlamp Bulb on a Mitsubishi Colt

Model: Mitsubishi Colt MK 1, Z30 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

If you need to replace the front headlamp bulb on this vehicle because it has blown, follow the instructions below and refer to the video. Once you locate the headlamp unit with the blown bulb, lift the vehicle on the same side.

Inside the wheel arch, there is a plastic panel that can be removed. Through the opening you have created, reach in to remove the rear cover of the headlamp and extract the bulb with the burnt holder.

Proceed to replace the bulb, taking care not to touch the glass with your fingers, then refit the rear cover of the headlamp and close the small plastic cover.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Remove Front Headlight Bulbs on a Mitsubishi Colt
Remove Front Headlight Bulbs on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Removing the front headlight bulbs on a Mitsubishi Colt? Here’s how to replace them. Use a suitable screwdriver to remove the plastic cover at the bo…
How to Replace the Headlight Bulb on a Mitsubishi Colt
How to Replace the Headlight Bulb on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) To replace the headlight bulb on a Mitsubishi Colt, access the inner wheel arch corresponding to the headlight that contains the bulb to be replaced.…
How to Replace the Rear Light Bulbs on a Mitsubishi Colt?
How to Replace the Rear Light Bulbs on a Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this tutorial, see how to replace the rear light bulbs on a Mitsubishi Colt, a very simple and quick operation. First, ensure the key is not inser…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos