Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Mitsubishi Colt?

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Tail light bulb

In this tutorial, see how to replace the rear light bulbs on a Mitsubishi Colt, a very simple and quick operation. First, ensure the key is not inserted for safety, then open the boot and, using a simple cross-head screwdriver, unscrew the two screws located on the inner edge of the light unit. Next, grasp the light unit, pull it towards you, and separate it from the bodywork. At this point, disconnect the connector, open the internal base, and replace the faulty bulb.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Front Headlight Bulbs on a Mitsubishi Colt
Remove Front Headlight Bulbs on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Removing the front headlight bulbs on a Mitsubishi Colt? Here’s how to replace them. Use a suitable screwdriver to remove the plastic cover at the bo…
Replacement of the rear headlight bulbs of the Mitsubishi Colt.
Replacement of the rear headlight bulbs of the Mitsubishi Colt.
Mitsubishi Colt (2004-2012 / MK 1, Z30) Today we will discover the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Mitsubishi Colt. First, …
How to Replace the Rear Light Bulbs in a Mitsubishi Colt?
How to Replace the Rear Light Bulbs in a Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this tutorial, you will see how to replace the rear light bulbs in a Mitsubishi Colt, a very simple and quick operation. First, ensure that the ke…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos