Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on the Mitsubishi ASX?

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front door panel on the Mitsubishi ASX, a very simple and quick operation. First, open the door in question, then remove all the indicated plastic caps.

Using a simple cross-head screwdriver, unscrew the screws located underneath them. Next, unclip the internal cover of the mirror, grip the panel from the lower edge, and pull it firmly outward to completely separate it from the door.

Finally, disconnect both the lock cable and the window regulator connector, and fit the replacement part if necessary.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

Instructions for Disassembling the Front Door Panel of a Mitsubishi ASX
Instructions for Disassembling the Front Door Panel of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) In today's video, we will see how to disassemble the front door panel on a Mitsubishi ASX, following these main instructions. First, open the front d…
How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
Removing the Inner Door Trim of a Mitsubishi ASX
Removing the Inner Door Trim of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) In this video, you will see how to remove the inner door trim of a Mitsubishi ASX. Start by removing the plastic cover of the deflector, then take of…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos