Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Mirage
    4. : How to perform a service reset on Mitsubishi Mirage

Mitsubishi Mirage - Video tutorial

Model: Mitsubishi Mirage LA, A00, A10 - Years 2012-2023
Part: -board computer
Operation: How to perform a service reset on Mitsubishi Mirage

In this video tutorial we can see how to reset the service on Mitsubishi Mirage. The first thing to do will be to carry out maintenance on the car, such as changing the engine oil and filters. Let's get inside the car, close all the doors including the trunk and the front bonnet, because otherwise the procedure might not be successful. We put on the handbrake, with the ignition off, press the button located under the speedometer until the display with the wrench flashes; now press the button again until the reset is done. Turn the engine off and on again to verify the correct reset.


Posted on 18 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Mitsubishi Mirage 2012-2023 - What are the exclamation mark symbols on a Mitsubishi Mirage? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos