Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Outlander
    4. : How to remove the factory radio from a 2010 Mitsubishi Outlander.

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 2 - Years 2007-2012
Part: Car stereo
Operation: How to remove the factory radio from a 2010 Mitsubishi Outlander.

If the original car radio inside your 2010 Mitsubishi Outlander has stopped working and you want to find out how to remove it quickly and safely, then all you have to do is read the following guide carefully and follow the steps described. First of all, get some thin and rigid objects to insert into the lower slot of the two air vents located on either side of the radio. Remove both and then pull the entire radio towards you. Finally, disconnect the electrical cable and the disassembly is complete.


Posted on 23 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos