Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Space Star
  6. : How to apply sealing to a side panel of the Mitsubishi Space Star.

Mitsubishi Space Star - Video tutorial

Model: Mitsubishi Space Star MK 1 - Years 1998-2005
Part: Bodywork
Operation: How to apply sealing to a side panel of the Mitsubishi Space Star.

In this video, we see how to apply soldering to the side panel of a Mitsubishi Space Star body. The entire paint must be completely and accurately removed, leaving only the metal body. The welding must be restored so that the two parts are perfectly joined. At this point, when the two parts are cold, we can pass the solder in a zigzag pattern to cover the welding. Then, with a spatula, we cover the welding well, making sure it is as flat as possible. We smooth it well, and then when it is dry, we pass a very fine paper to smooth it perfectly before moving on to painting.


Posted on 12 June 2023 by ScegliAuto

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos