Do it yourself
| ||||
|
Mitsubishi Mirage - Video tutorial
Model: Mitsubishi Mirage
LA, A00, A10
- Years 2012-2023 In this tutorial, we can see how to remove the rear bumper on the Mitsubishi Mirage, an extremely simple and quick operation. First, we open the trunk door, then we locate the two bolts placed along the inner edges of the headlights, unscrew them, and separate both headlights from the body. Next, we remove the bulbs and unscrew all the bolts indicated with a 10mm socket wrench. At this point, all that's left is to grab the bumper from one of the two ends, pull it outward, and separate it from the frame. Finally, we disconnect the connectors of the fog lights and follow the reverse procedure to install the replacement.
Posted on 8 December 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |