Do it yourself
| ||||
|
Mitsubishi Mirage - Video tutorial
Model: Mitsubishi Mirage
LA, A00, A10
- Years 2012-2023 Replacing the front bumper on the Mitsubishi Mirage, as we can see in this tutorial, is an extremely simple and fast operation. First of all, we open the engine hood, then using a flat head screwdriver or an equivalent tool, we unhook all the plastic rivets located on the lower side of the bumper. Next, we locate the indicated bolts, unscrew them with a 10mm socket wrench and a 12mm socket wrench, and by levering from one of the two side ends, we detach the bumper from the frame. To install the replacement, simply follow the reverse procedure.
Posted on 23 November 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |