Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades of a Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Windshield wipers

See other generations:
Video tutorial

Today, with the help of this short video tutorial, you will learn how to replace the wiper blades on a Mitsubishi ASX vehicle. Position the wiper blades vertically and proceed with the replacement by lifting the clip that secures the blade to the arm. Lower the pin and then slide out the blade.

Insert the new blade into the arm and close the clip. Repeat the same procedure on the left blade and finally on the rear blade.

Wiper blades should be replaced at least once a year and always simultaneously. Keeping wiper blades for too long can damage the glass.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
Where are the fuses located on the Mitsubishi ASX?
Where are the fuses located on the Mitsubishi ASX?
Mitsubishi Asx (2010-2023 / MK 1) The fuses for the Mitsubishi ASX are located inside two fuse boxes installed in the vehicle: the first is behind the plastic panel situated at the bo…
Where is the fuse box of the Mitsubishi ASX located?
Where is the fuse box of the Mitsubishi ASX located?
Mitsubishi Asx (2010-2023 / MK 1) In order to locate the fuse box containing the fuses for your first edition Mitsubishi ASX on your own, you must first carefully read the following g…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos