Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Mitsubishi L200?

Model: Mitsubishi L 200 MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

The procedure to reset the Service light on the Mitsubishi L200 involves turning on the instrument cluster to access the menu that will appear on the display in the centre of the dashboard. Here, press and hold the "Setup" option for a few seconds until a message appears on the screen.

When this message is displayed, press "Yes" to completely reset the maintenance light. After completing the reset procedure, you can turn off the instrument cluster by turning the key back.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Mitsubishi L200?
How to reset the Service light on the Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) To reset the Service light on the Mitsubishi L200, turn on the ignition by rotating the key in the ignition barrel. Once the ignition is on, press th…
How to reset the Service light on a Mitsubishi L200?
How to reset the Service light on a Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) To reset the Service light on a Mitsubishi L200, connect a diagnostic tool to the vehicle's OBD port: this is located on the dashboard immediately be…
How to Reset the Service Light on the Mitsubishi L200
How to Reset the Service Light on the Mitsubishi L200
Mitsubishi L 200 (2005-2015 / MK 2) The following procedure will allow you to reset the service light for the routine maintenance of the engine oil change on the Mitsubishi L200. First,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos