Do it yourself
| ||||
|
Nissan Tino - Videoguide
Nissan Tino (2000-2006 / )
Head gasket replacement When replacing the cylinder head gasket, it is good practice to replace all gaskets, oil seals, rubber rings and special nuts and bolts when assembling the …read all… Posted on 17 August 2023 by ScegliAuto
Nissan Tino (2000-2006 / )
Intake manifold gasket replacement The gasket kit of the smeriglio series also includes the gasket of the intake manifold: after having carefully cleaned the gasket seats, both on the manifold …read all… Posted on 4 August 2023 by ScegliAuto
Nissan Tino (2000-2006 / )
Car turbine replacement The turbine is an important element for the functioning of the engine. The turbine is a highly efficient component because it transforms exhaust gases into …read all… Posted on 3 August 2023 by ScegliAuto
Nissan Tino (2000-2006 / )
Guide to the operation of a hydraulic lifter The regulator eyelash is a device for maintaining zero clearance in an internal combustion engine. If this clearance is not maintained, the valve and its …read all… Posted on 3 August 2023 by ScegliAuto
Nissan Tino (2000-2006 / )
Replacement exhaust manifold gasket First of all, it is suggested to carry out this maintenance with a cold engine since elements which, in contact with the exhaust gases, reach high temperatures …read all… Posted on 3 August 2023 by ScegliAuto
Nissan Tino (2000-2006 / )
Guide on how to replace the cylinder head gasket The cylinder head gasket is interposed between the cylinder and the cylinder head to ensure that oil, combustion fumes and coolant do not come into contact …read all… Posted on 3 August 2023 by ScegliAuto
Nissan Tino (2000-2006 / )
Engine (5)
Turbine (1)
Valve (1)
Valve guide rubbers replacement When regenerating a cylinder head, it is a good idea to also replace the valve guide rubbers, which are generally always present in the emery gasket kit. Once …read all… Posted on 3 August 2023 by ScegliAuto |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |