Do it yourself
Frequently asked questions about cars and motorcycles

Intake Manifold Gasket Replacement

Model: Nissan Tino MK 1 - Years 2000-2006
Part: Engine

The gasket kit includes the intake manifold gasket: after thoroughly cleaning the gasket seats on both the manifold and cylinder head sides, apply the new gasket aligning it with the dowel pins on the cylinder head; then fit the intake manifold and tighten the fixing bolts using a cross pattern (as indicated in the video caption) and a torque wrench. Ensure the gasket adheres perfectly to the surfaces to guarantee a proper seal and prevent any leaks.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Tino (2000-2006 / MK 1) It is recommended to perform this maintenance with the engine cold, as components that come into contact with exhaust gases reach high temperatures. …
Nissan Tino (2000-2006 / MK 1) When replacing the cylinder head gasket, it is good practice to replace all gaskets, oil seals, O-rings, and special bolts during the engine assembly…
Nissan Tino (2000-2006 / MK 1) The turbocharger is an important component for the engine's operation. It is a highly efficient part as it converts exhaust gases into mechanical ene…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos