Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Engine Cylinder Head Gasket

Model: Nissan Tino MK 1 - Years 2000-2006
Part: Engine

The cylinder head gasket is placed between the cylinders and the head; it ensures that oil, combustion gases, and coolant do not come into contact with each other and do not leak. The main cause of damage to this gasket is overheating. This guide shows how to replace the engine cylinder head gasket. The first step is to drain the engine oil, which will then be replaced with new oil, and the coolant; remove the alternator belt and accessory belt. Once everything is cleared, you can remove the valve cover from the head. Next, remove the timing belt and the engine assembly. To properly reassemble everything after the work, a torque wrench will be necessary.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Cylinder Head Gasket
Replacement of Cylinder Head Gasket
Nissan Tino (2000-2006 / MK 1) When replacing the cylinder head gasket, it is good practice to replace all gaskets, oil seals, O-rings, and special bolts during the engine assembly…
Intake Manifold Gasket Replacement
Intake Manifold Gasket Replacement
Nissan Tino (2000-2006 / MK 1) The gasket kit includes the intake manifold gasket: after thoroughly cleaning the gasket seats on both the manifold and cylinder head sides, apply th…
Replacement of Exhaust Manifold Gasket
Replacement of Exhaust Manifold Gasket
Nissan Tino (2000-2006 / MK 1) It is recommended to perform this maintenance with the engine cold, as components that come into contact with exhaust gases reach high temperatures. …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos