Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Nissan Juke

Model: Nissan Juke MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

See other generations:
Video tutorial

This guide explains how to replace the right front headlamp bulb on a Nissan Juke. To replace the bulb, you must remove the front bumper to access the headlamp and gain better access to the bulb holder. Remove the upper, side, and lower screws to detach the bumper.

Then, unscrew the upper nuts and disconnect the main connector to remove the headlamp. To replace the bulb, take off the cap from the bulb holder and disconnect the small internal connector.

Next, rotate the bulb counterclockwise to remove it. Follow the steps in reverse to refit the bulb.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Learn how to replace the front headlamp bulbs on a Nissan Juke: open the bonnet by pulling the lever located at the bottom right of the dashboard and…
How to Replace the Headlamp Bulb on a Nissan Juke
How to Replace the Headlamp Bulb on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the headlamp bulb on a Nissan Juke, open the bonnet to access the components inside the engine bay. You need to disconnect the air duct to…
How to Replace the Headlamp Bulb on a Nissan Juke
How to Replace the Headlamp Bulb on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) The steps to replace the front headlamp bulb on a Nissan Juke are simple to carry out yourself. Begin by opening the front bonnet of the vehicle and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos