Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Brake Pads on a Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

This video demonstrates how to remove the front brake disc on a Nissan X-Trail. Position the car on a column lift and raise it to a comfortable height for work.

Unscrew the bolts with a socket wrench or air drill and remove the wheel. Then, begin unscrewing the bolts of the brake caliper, detaching it from the bracket.

Use a screwdriver to detach the brake pads. Now, remove the caliper bracket and unscrew the bolts on the brake disc (using a Torx screwdriver).

Pull the disc towards you to remove it from the hub. Apply grease to the bolts and prepare all parts for assembly. Refit the brake disc with all associated bolts, secure the caliper bracket to the disc along with the new pads, then mount the brake caliper, ensuring all bolts are tightened properly.

Before refitting the wheel, bleed the brake caliper and tighten the bolt. Finally, refit the wheel with the bolts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Nissan X Trail (2007-2014 / MK 2, T31) For replacing the rear discs and pads, it is advisable to lift the vehicle on a hydraulic lift and remove the rear wheel. At this point, remove the l…
Nissan X Trail (2001-2006 / MK 1, T30) .. to replace the brake light bulbs on a Nissan X-Trail, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot.. …
Nissan X Trail (2001-2006 / MK 1, T30) .. and accessing the relays of your Nissan X-Trail. Start by opening the driver's front door. Next, remove the side carpet. Once removed, you will.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos