Do it yourself
| ||||
|
Nissan X Trail - Video tutorial
Model: Nissan X Trail
MK 2, T31
- Years 2007-2014 To replace the rear discs and pads it is advisable to lift the vehicle on a lift and remove the rear wheel; at this point remove the lower pin of the brake caliper in order to be able to lift it and extract the old pads; then disassemble the support complete with caliper and then remove the rubber cap on the disc, near the stud pins and slightly loosen the hand brake shoe adjuster to be able to remove the old disc; brush and apply grease to the center of the hub before installing the new disc, bringing the brake shoe adjuster to zero and applying the rubber pad: at this point, refit the caliper support, re-enter the piston with the special tool and install the new pads completing the fixing of the caliper and reassembling the wheel.
Posted on 16 October 2023 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |