Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the air filter on the Nissan Qashqai J10

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

In this video we can see how to change the air filter of the Nissan Qashqai J10: the box with the air filter is located on the right side of the engine hood (looking at the car from the front) just above the starter battery. Let's release the two metal clips on the cover, and remove the filter, which is in a vertical position.

Remove it from its drawer, which we will clean thoroughly, as well as the housing from which we removed it, removing dust and residues. Replace the used filter with a new and clean one, paying attention to the installation direction, and then put it back in place, closing the two metal clips securely.

Replacement completed.


Posted on 1 January 2025 by ScegliAuto


Related tutorials

How to Change the Air Filter on a Nissan Qashqai 2.0 dCI J10 Version
How to Change the Air Filter on a Nissan Qashqai 2.0 dCI J10 Version
Nissan Qashqai (2006-2014 / J10) Let's see how to replace the air filter on the Nissan Qashqai: open the bonnet of the vehicle. The filter is located on the right side of the bonnet,…
Replacing the Pollen Filter on Nissan Qashqai J10
Replacing the Pollen Filter on Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) To access the cabin air filter, or pollen filter, on a Nissan Qashqai J10, you need to crouch down and work in the footwell area and manually remove …
How to Replace the Air Filter of the Nissan Qashqai
How to Replace the Air Filter of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Replacing the engine air filter in your Nissan Qashqai J10 (2006-2014) is a very simple task that you can do independently by following the steps out…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos