Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front turn signal bulb of the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

If you own a first-generation Nissan Juke and want to learn how to replace the front turn signal bulb, all you have to do is read the following guide and follow the described procedure. First, make sure you have a new bulb that is perfectly compatible with your car, then lift the front hood and disconnect the electrical cable located at the back of the headlight.

Once you have completed this simple operation, remove the faulty bulb and replace it with the new one. Finally, reconnect the electrical cable and you're done.


Posted on 3 January 2025 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter in the Nissan Juke
How to Replace the Diesel Filter in the Nissan Juke
Nissan Juke (2010-2019 / MK 1) In today's video, you will see how to independently replace the diesel filter in the Nissan Juke 1.5 dCi. First, allow the vehicle to cool down, then…
Reset Service Light on Nissan Juke
Reset Service Light on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Do you want to reset the maintenance light on a Nissan Juke? Here’s how to proceed with the reset of the Nissan Juke car light. Turn on the instrumen…
How to replace the interior light bulb of the Nissan Juke 2
How to replace the interior light bulb of the Nissan Juke 2
Nissan Juke (2019-2026 / MK 2) If you want to replace the interior light bulb of your second-generation Nissan Juke by yourself, you must first carefully read our new guide and the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos