Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to remove knob on Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Gear Shift Knob
Operation: How to remove knob on Nissan Navara

Do you want to replace the manual gear knob on the Nissan Navara? Let's see in this video how to do it: grab the knob with your hands and rotate it to the left (as if we were removing anything), then, remove it from the shift rod. To carry out the assembly: we grab the new knob and screw it into the rod on the central tunnel, then, we tighten the new knob until the end of the thread of the lever. We disassemble the leather cap located at the bottom of the knob if we want to replace it. Finally, we test the correct assembly of the knob with the movement of the rod on the central tunnel.


Posted on 15 October 2023 by ScegliAuto



How do I replace the shift knob on the Nissan Navara?
Nissan Navara (2005-2015 / D40) No tools are required to replace the Nissan Navara gear knob. First of all, you need to remove the old knob: to do this, simply hold it and unscrew i
How to remove the Nissan Navara gear knob
Nissan Navara (2005-2015 / D40) Today, in this short guide, let's see the instructions on how to disassemble and replace the Nissan Navara gear knob, in simple and quick steps. Firs
How to engage or disengage all-wheel drive (4x4) on the Nissan Navara D40
Nissan Navara (2005-2015 / D40) In this short guide we will see the main instructions that will allow us to activate or deactivate the 4x4 traction on the Nissan Navara first series

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos