Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace oil and filter in a Nissan Navara?

Model: Nissan Navara D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

See other generations:
Video tutorial

The oil change in a Nissan Navara is very similar to that of any other car but requires an extra step. To be precise, this vehicle has a lower panel that protects various parts of the car and must be removed before proceeding with the oil change.

Apart from this, the process is carried out normally by first unscrewing the oil filler cap and then the drain plug, being careful to place a large enough basin underneath. The next step is to replace the filter, close the drain plug, and fill with new oil. Don't forget to reinstall the panel!


Posted on 29 January 2025 by ScegliAuto


Related tutorials

How do you replace the oil filter of the Nissan Navara?
How do you replace the oil filter of the Nissan Navara?
Nissan Navara (2014-2024 / D23) It will be possible to replace the oil filter of the Nissan Navara by lifting the car, so that it is possible to access the components located in the…
How to Replace the Oil and Oil Filter on the Nissan Navara
How to Replace the Oil and Oil Filter on the Nissan Navara
Nissan Navara (2014-2024 / D23) To replace the oil and oil filter on the Nissan Navara, open the bonnet, pour engine flush into the oil filler cap, start the engine for 3 to 4 minut…
How to Replace the Cabin Filter on the Nissan Navara
How to Replace the Cabin Filter on the Nissan Navara
Nissan Navara (2005-2015 / D40) To replace the cabin filter on the Nissan Navara, open the glove compartment located on the passenger side. This will allow you to detach the pins in…

    Frequently Asked Questions

    • Navara 2005-2015 - How many kg of oil go into the Nissan Navara yd25 engine? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos